Home > Products & Services > Service > European Rental Program : Temperature and Validation

Rental Program

Rent Validation and Temperature Equipment Temperature and Validation

We offer a comprehensive range of products suitable for your short term Temperature / Validation needs.

Please select the product you are interested in renting and complete your contact details at the bottom of the page. A representative will then contact you as soon as possible to discuss your needs, or if you prefer, contact us at the location below.

GE
Sensing
European Rental Center

Sinsheimerstrasse 6
75179 Pforzheim
Germany
T + 49 7231 14335 14
F + 49 7231 14335 29
   
Dry Block Temperature Calibrators
DBC 150/650 Series

This innovative calibrator combines a highly stable temperature source with precision measurement of temperature probe signals, providing a truly standalone temperature calibrator suitable for laboratory, workshop and portable use.

Rapid heating, cooling and settling. Switch test, ramp, step and preset functions Reads set temperature and device output simultaneously. Measures reference probe, RTD’s, T/C’s mA, mV and ohms Automated calibration via RS 232. Ranges listed below.		  
Temperature Calibrators Rental in Europe

Rental Part No: Description: Select
RD-DBC150 Dry Block Calibrator (-20 to 150°C)
RD-DBC650 Dry Block Calibrator (+50 to 650°C)

Click for more package information Click for more product information


Dry Block Temperature Calibrators for Pharmaceutical Validation

HTR-400
For dry heat ovens, sterilization tunnels, autoclaves with temperature range of 50 to 400°C

LTR-140
For freezers, cold rooms, incubators, autoclaves. With temperature range of -25 to 140°C
  
Renting Temperature Calibrator

Rental Part No: Description: No. of units
KG-003 HTR-400
KG-004 LTR-140

Click for more package information Click for more product information


Ultra Low Temperature Calibration Bath

CTR-80
Operating from -80 to 30°C, the CTR-80 brings fast response and high stability to your cold temperature applications. It runs with Halocarbon oil, which must be purchased separately.

CTR-40
Operating from -40°C to +150°C, the CTR-40 brings fast response and high stability to your cold temperature applications. It runs with Silicon oil, which must be purchased separately.

Due to gas in the compressors, these units can not be shipped by air freight. Delivery is via road transport only.
Minimum rental period for these items is 4 weeks. 		 
Temperature Calibration System on Rent

Rental Part No: Description: No. of units
KG-062 CTR-80
KG-182 CTR-40
M0267 Halocarbon oil for CTR-80 (1 Gallon=3,8l)
KG-177 Silicon oil for CTR-40 (10 litre)

Click for more package information Click for more product information


Validation system with thermocouples


The Validator ® 2000 is a standalone thermal validation system designed to comply with new regulations worldwide for validation of thermal processes.		  
Validation System with Thermocouples on Rent
3 Sensor input modules are provided for instant plug-in for up to 36 sensors, eliminating quick disconnects for each sensor.

Rental Part No: Description: No. of units
KG-052 Kaye Validator® 2000
KG-183 As-Found Calibration Kaye Validator® 2000
(Includes certificate. Can be ordered separately)

Click for more package information Click for more product information


Intelligent Temperature Standard (for Validation)
IRTD-400

Temperature Standard includes DKD Calibration Certificate.
Temperature Range: -196°C to 420°C
Accuracy: +/- 0.025°C
 
Renting Temperature Calibration

Rental Part No: Description: No. of units
KG-005 IRTD-400
KG-136 Recalibration of IRTD
Charge for verification of the IRTD after use, independent of the length of rental period.

Click for more package information Click for more product information


Pressure Sensor

Pressure Sensor 0 to 4 bar absolute
(incl. Calibration-Certificate at 23°C and 121°C; this transducer does not need an extra power supply - it is connected directly to the V2K-IRTD connector and the SIM). Used for autoclave validation. 		 
Pressure Sensor Rental in Europe

Rental Part No: Description: No. of units
KG-75-Rent Pressure Sensor

Click for more package information


Kaye Validator KL / Digi Kaye

Validator KL
Validation system for max. 32 inputs
Not 21 CFR part 11 compliant

Kaye Digistrip
Validation system with built in printer.
Windows validation software allows 32 inputs
Dos software allows 64 inputs
Not 21 CFR part 11 compliant 		 
Digi Kaye on Rent

Rental Part No: Description: No. of units
KG-001 Kaye Validator KL
KG-002 Kaye Digistrip

Click for more package information Click for more product information


Portable Temperature Calibration Units

Portable calibration and verification system for the factory floor.

FTR-122 Field Temperature Reference
It operates from -10 to 122°C.

FTR-350 Field Temperature Reference
It operates from 33 to 350°C and reaches maximum temperature in 12 minutes.

FTM-100 Field Temperature Monitor
It operates from -196 to 420°C.
Included is a Pt 100 sensor. 		 
Rent Temperature Calibration System

Rental Part No: Description: No. of units
KG-039 Field Temperature Reference FTR-122
KG-050 Field Temperature Reference FTR-350
KG-040 Field Temperature Monitor FTM-100 (incl. PT100)

Click for more package information Click for more product information


Stainless Steel Thermocouple Feedthru

Allows up to 18 thermocouples to be introduced into the validated chamber.

Standard 1.5”TriClamp® process connection.

Simple installation without the need of any tools, fitted with safety release mechanism. 		 
Thermocouple Feedthru on Rent

Rental Part No: Description: No. of units
RK-KG-150 Stainless Steel Thermocouple Feedthru

Click for more product information


Valprobe™ Wireless process validation and monitoring

Kaye ValProbe™ is a wireless thermal validation system designed to comply with new regulations worldwide for validation of thermal processes. It meets FDA guidelines for protecting electronic data (21 CFR part 11).

ValProbe™ Reader
The ValProbe™ Reader provides the communication link between the loggers and computer. Software included.

The ValProbe™ reader is required to read and program the ValProbe™ loggers (order separately).

ValProbe™ Single Reader station
Individual ValProbe loggers can be inserted into the Single Reader for data download. 		 
Renting Wireless Thermal Validation System
Rental Part No: Description: No. of units
KG-172 Reader Station
KG-172-Single ValProbe™ Single Reader station
The minimum rental period for the Kaye ValProbeTM system is 2 weeks.

Click for more package information Click for more product information

Temperature Logger
Temperature Range -45°C to 140°C
Available as rigid, flexible and bendable


Rental Part No: Description: No. of units
KG-173 Temperature Logger (first 2 weeks incl. as found)
KG-173E Temperature Logger (extension week)
 
Temperature Logger Renting in Europe

Humidity Logger
Temperature Range 0°C to +95°C
Humidity Range 20 - 85 % RH


Rental Part No: Description: No. of units
KG-175 Humidity Logger (first 2 weeks incl. as found)
KG-175E Humidity Logger (extension week)
 
Humidity Logger on Rent

Pressure Logger
Temperature Range 0°C to 140°C
Pressure Range 0 to 5 bar absolute


Rental Part No: Description: No. of units
KG-196 Pressure Logger (first 2 weeks incl. as found)
KG-196E Pressure Logger (extension week)
 
Rental Pressure Logger

Your contact details
     
Title
* Name
* Company
* Address
* Country
*Phone
* Email
Comments
Additional Detail
Rental start date
Rental duration (weeks)

By submitting the above information to GE Sensing through this website, you hereby agree to our Privacy Policy and authorize GE Sensing to include all or any part of this data in directories of GE Sensing or its affiliated companies held, processed and maintained in the United States of America or elsewhere and to offer you, or allow other reputable organizations to offer you, products and services we think you may find interesting. If you do not wish to receive such information, or if you require access to your data to update it or otherwise, please contact us at sensing@ge.com.